Source code for user_apps.acq400.delay_trigger_setup

#!/usr/bin/python
"""This file is a setup file for the delay trigger
mode of operation for the acq1001+480 setup.

This file will perform all the setup required to
take data on the acq480, triggering from the gpgs,
which itself triggers from an external trigger.
For more information on the setup please refer to the
D-TACQ delay trigger report.

An example command line example would be ::
 
    delay_trigger_setup.py --verbose 1 --delay 10000000 acq1001_105

 
This command runs the script in verbose mode,
configures the gpg to run with a 10s delay (dependant
on FPCLK frequency) on acq1001_105.

.. rst-class:: hidden

    usage: delay_trigger_setup.py [-h] [--verbose VERBOSE] [--delay DELAY]
                                [--pre PRE] [--post POST]
                                uuts [uuts ...]

    delay-trigger analysis

    positional arguments:
    uuts               uut names

    optional arguments:
    -h, --help         show this help message and exit
    --verbose VERBOSE  verbose
    --delay DELAY      delay_trigger parameter
    --pre PRE          delay_trigger parameter
    --post POST        delay_trigger parameter
"""


import acq400_hapi
import argparse



def configure_uut(args, uut):

    # configure uuts
    if args.verbose:
        print("Configuring UUT")

    # Run delay_trigger shell script
    uut.s0.delay_trigger = args.delay      # Run delay_trigger with parameter args.delay

    uut.s0.SYS_CLK_FPMUX = "FPCLK"          # set to front panel clk
    uut.s0.SIG_CLK_MB_FIN = 1E6             # set the clk mb fin to 1E6
    uut.s0.SIG_CLK_MB_SET = 5E7             # MB set to 5E7

    uut.s1.CLK = 1                          # set site 1 clk to external
    uut.s1.CLK_DX = 1                       # set site 1 clk to d0
    uut.s1.CLK_SENSE = 1                    # set site 1 clk to rising edge

    uut.s1.TRG = 1                          # set site 1 capture trg to external
    uut.s1.TRG_DX = 1                       # set site 1 trg to d1
    uut.s1.TRG_SENSE = 1                    # set site 1 trg on rising edge

    uut.s0.SIG_SYNC_OUT_CLK = 0             # set SYNC out clk to clk
    uut.s0.SIG_SYNC_OUT_CLK_DX = 0          # set SYNC clk out from d0
    uut.s0.SIG_SYNC_OUT_TRG = 0             # set SYNC out trg to trg
    uut.s0.SIG_SYNC_OUT_TRG_DX = 0          # set SYNC trg out from d0
    uut.s0.SIG_SYNC_OUT_SYNC = 0            # set SYNC out sync to gpg
    uut.s0.SIG_SYNC_OUT_SYNC_DX = 0         # set SYNC out sync from d1

    uut.s0.transient = "PRE=%d POST=%d SOFT_TRIGGER=0" % (args.pre, args.post)
    uut.s0.set_arm = 1

    if args.verbose:
        print("Configured UUT")




def setup(args):

    # Connect to the UUT
    if args.verbose:
        print("The following UUT has been loaded: ", args.uuts)

    uuts = [acq400_hapi.Acq400(u) for u in args.uuts]

    if args.verbose:
        print("Setting Delay Trigger as :", args.delay)

    for uut in uuts:
        configure_uut(args, uut)

    if args.verbose:
        print("")
        print("Finished configuration")
        print("")



def get_parser():
    parser = argparse.ArgumentParser(description='Sets up delayed trigger for acq1001+480')
    parser.add_argument('--verbose', type=int, default=0, help="verbose")
    parser.add_argument('--delay', type=int, default=0, help="delay_trigger parameter")
    parser.add_argument('--pre', type=int, default=0, help="delay_trigger parameter")
    parser.add_argument('--post', type=int, default=100000, help="delay_trigger parameter")
    parser.add_argument('uuts', nargs='+', help="uut names")
    return parser


if __name__  == '__main__':
    setup(get_parser().parse_args())